If you’re someone who wants to install an operating system on virtual machines like VMware and VirtualBox then you must enable virtualization technology. In this guide, you’re going to learn how to enable virtualization in BIOS HP Laptop in Windows 10.
Meanwhile, native support for hardware virtualization is one of the most powerful technologies built into Windows 10. This is accomplished through the use of Hyper-V virtualization technology. When you activate virtualization in Windows 10, you may create a virtual computer on your PC. This computer is entirely independent of your primary system. As a result, you may go crazy with it. Install whatever you want on it without worrying about interfering with the main system.
What Exactly Is Intel Virtualization Technology (Intel VT)?
Intel Virtualization Technology (Intel VT or IVT) is a feature built into Intel CPUs that allows different operating systems and environments to be combined and hosted on a single processor.
The ability of the processor’s hardware to split and isolate its computational power for numerous host virtual machines and their operating systems is referred to as Intel virtualization technology. Vanderpool was the previous name for Intel’s virtualization technology.
How to Check If Virtualization Technology is Enabled or Disabled?
You can also see if Virtualization is enabled under the Performance tab of the Task Manager.
- Right-click on the Taskbar and select Task Manager.
- Go to the Performance tab and select CPU.
- Now, check whether it’s disabled or enabled next to Virtualization.
If you look at the CPU performance panel, you’ll see that virtualization is enabled. If it isn’t, you must activate it in the BIOS or UEFI settings.
How to Enable Virtualization in BIOS HP Laptop
While most modern PCs allow hardware virtualization, not all computer manufacturers activate this functionality as standard. If the option is available, the configuration may be referred to as VT-x, AMD-V, SVM, Vanderpool, Intel VT-d, or AMD IOMMU.
Here are the steps to enable virtualization in BIOS HP Laptop:
- Restart your Laptop and repeatedly and Press the F10 key for BIOS Setup.
- Navigate to System Configuration and select Virtualization Technology.
Virtualization Technology
- Now, select Enabled.
Enabled
- Press the F10 key and select Yes and press the Enter key to save changes and Reboot.
These were the steps to enable virtualization in BIOS HP Laptop in Windows 10.
Read Next:
How to Install Hyper-V on Windows 10 Home
How to check Laptop Generation in Windows 10
No Responses